Recent Group Publications
- Carbon Nanotube Reinforced Poly-p-Phenylene Terephthalamide Fibers for Toughness Improvement: A Molecular Dynamics Study
- Atomistic Mechanisms of Ultralarge Bending Deformation of Single-Crystalline TiO2-B Nanowires
- Application of porous metal foam heat exchangers and the implications of particulate fouling for energy-intensive industries
- Effect of Fe-doping on bending elastic properties of single-crystalline rutile TiO2nanowires
- Tumor-Targeting Fluorescent Probe Based on 1,8-Naphthalimide and Porphyrin Groups
- Metal-Nitrogen-Doped Carbon Materials as Highly Efficient Catalysts: Progress and Rational Design
- A new data-driven topology optimization framework for structural optimization
- Helium–oxygen mixture model for particle transport in CT-based upper airways
- Modelling of red blood cell morphological and deformability changes during in-vitro storage
- Atomic Investigation on the Facet-Dependent Melting of Ceramic Nanostructures via In Situ Electron Irradiation
- Reversible gas capture using a ferroelectric switch and 2D molecule multiferroics on the In2Se3 monolayer
- Low interfacial thermal resistance between crossed ultra-thin carbon nanothreads
- High density mechanical energy storage with carbon nanothread bundle
- Application of high-order lattice Boltzmann pseudopotential models
- Chitosan/graphene complex membrane for polymer electrolyte membrane fuel cell: A molecular dynamics simulation study
- Modelling of simultaneous heat and mass transfer considering the spatial distribution of air velocity during intermittent microwave convective drying
- Stress-Relaxation and Cyclic Behavior of Human Carotid Plaque Tissue
- Design tools for patient specific and highly controlled melt electrowritten scaffolds
- Polypeptide-rhodamine B probes containing laminin/fibronectin receptor-targeting sequence (YIGSR/RGD) for fluorescent imaging in cancers
- Single layer diamond – A new ultrathin 2D carbon nanostructure for mechanical resonator
- Stacking-Dependent Interlayer Magnetic Coupling in 2D CrI3/CrGeTe3 Nanostructures for Spintronics
- A review of respiratory anatomical development, air flow characterization and particle deposition
- Optimization of Processing Parameters of Power Spinning for Bushing Based on Neural Network and Genetic Algorithms
- Carotid Bifurcation With Tandem Stenosis—A Patient-Specific Case Study Combined in vivo Imaging, in vitro Histology and in silico Simulation
- Characterisation on the hygrothermal degradation in the mechanical property of structural adhesive: A novel meso-scale approach
- In Situ Atomic-Scale Study on the Ultralarge Bending Behaviors of TiO2-B/Anatase Dual-Phase Nanowires
- Simultaneous removal of cationic and anionic heavy metal contaminants from electroplating effluent by hydrotalcite adsorbent with disulfide (S2-) intercalation
- Quantified dense gas conical diffuser performance under uncertainties by flow characteristic analysis
- Euler-Lagrange Prediction of Diesel-Exhaust Polydisperse Particle Transport and Deposition in Lung: Anatomy and Turbulence Effects
- Two-Dimensional CuTe2X (X = Cl, Br, and I): Potential Photocatalysts for Water Splitting under the Visible/Infrared Light
- Role of Nitrogen on the Mechanical Properties of the Novel Carbon Nitride Nanothreads
- A novel super-elastic carbon nanofiber with cup-stacked carbon nanocones and a screw dislocation
- How Gaseous Environment Influences a Carbon Nanotube-Based Mechanical Resonator
- Graphynes: An alternative lightweight solution for shock protection
- Thermal Transport in 3D Nanostructures
- Smoothed Finite Element Methods for Predicting the Mid to High Frequency Acoustic Response in the Cylinder-Head Chamber of a Diesel Engine
- Optical coherence tomography-based patient-specific coronary artery reconstruction and fluid–structure interaction simulation
- Interaction pressure tensor on high-order lattice Boltzmann models for nonideal fluids
- Molecular insights on the interference of simplified lung surfactant models by gold nanoparticle pollutants
- Aberrant activation of Wnt signaling pathway altered osteocyte mineralization
- Atomic-scale investigation on the ultra-large bending behaviours of layered sodium titanate nanowires
- Modeling of mass transfer enhancement in a magnetofluidic micromixer
- Engineering the mechanical properties of CNT/PEEK nanocomposites
- A coarse-grained red blood cell membrane model to study stomatocyte-discocyteechinocyte morphologies
- Impact of Nanoparticle Uptake on the Biophysical Properties of Cell for Biomedical Engineering Applications
- Adsorption of Collagen-like Peptides onto Gold Nanosurfaces
- Interaction of gold nanosurfaces/nanoparticles with collagen-like peptides
- Uncertainty Quantification in high-density fluid radial-inflow turbines for renewable low-grade temperature cycles
- General existence of flexural mode doublets in nanowires targeting vectorial sensing applications
- Transient heat transfer and non-isothermal particle-laden gas flows through porous metal foams of differing structure
- A numerical investigation of drug extravasation using a tumour–vasculature microfluidic device
- The stress-strain relationship of liquid marbles under compression
- A coarse-grained multiscale model to simulate morphological changes of food-plant tissues undergoing drying
- A 3-D coupled Smoothed Particle Hydrodynamics and Coarse-Grained model to simulate drying mechanisms of small cell aggregates
- Polydisperse Microparticle Transport and Deposition to the Terminal Bronchioles in a Heterogeneous Vasculature Tree
- Numerical investigation of atherosclerotic plaque rupture using optical coherence tomography imaging and XFEM
- Atypical Defect Motions in Brittle Layered Sodium Titanate Nanowires
- Reproducing kernel particle method for two-dimensional time-space fractional diffusion equations in irregular domains
- Breakdown of Hooke’s law at the nanoscale – 2D material-based nanosprings
- Molecular dynamics simulations of adsorption and desorption of bone morphogenetic protein-2 on textured hydroxyapatite surfaces
- A Comparative Study of Mixed Resolved–Unresolved CFD-DEM and Unresolved CFD-DEM Methods for the Solution of Particle-Laden Liquid Flows
- Distorted Janus Transition Metal Dichalcogenides: Stable Two-Dimensional Materials with Sizable Band Gap and Ultrahigh Carrier Mobility
- Single-molecule insights into surface-mediated homochirality in hierarchical peptide assembly
- Underlying burning resistant mechanisms for titanium alloy
- Simplest MOF Units for Effective Photodriven Hydrogen Evolution Reaction
- Steered molecular dynamics characterization of the elastic modulus and deformation mechanisms of single natural tropocollagen molecules
- A new regularization method for the dynamic load identification of stochastic structures
- Effectiveness of optimized control strategy and different hub height turbines on a real wind farm optimization
- Graphene Helicoid: Distinct Properties Promote Application of Graphene Related Materials in Thermal Management
- Thermal conduction of one-dimensional carbon nanomaterials and nanoarchitectures
- Notch expressed by osteocytes plays a critical role in mineralisation
- Accurate Multi-Physics Numerical Analysis of Particle Preconcentration Based on Ion Concentration Polarization
- Development of realistic food microstructure considering the structural heterogeneity of cells and intercellular space
- Theoretical investigation of calcium-decorated Β12boron sheet for hydrogen storage
- Application of a coupled smoothed particle hydrodynamics (SPH) and coarse-grained (CG) numerical modelling approach to study three-dimensional (3-D) deformations of single cells of different food-plant materials during drying
- Coupled CFD-DEM simulation of oscillatory particle-laden fluid flow through a porous metal foam heat exchanger: Mitigation of particulate fouling
- A novel numerical model to predict the morphological behavior of magnetic liquid marbles using coarse grained molecular dynamics concepts
- In situ mechanical resonance behaviour of pristine and defective zinc blende GaAs nanowires
- Parametric study on cement treated aggregate panel under impact load
- Numerical investigation of diesel exhaust particle transport and deposition in the CT-scan based lung airway
- Heat transfer enhancement in a baffled attic-shaped space
- Ultrafine particle transport and deposition in a large scale 17-generation lung model
- Investigation of red blood cell mechanical properties using AFM indentation and coarse-grained particle method
- Application of 3D imaging and analysis techniques for the study of food plant cellular deformations during drying
- Two- and four-way coupling of cohesive poly-disperse particulate foulants on a metal foam fibre immersed in quiescent fluid
- Thermal conductivity of diamond nanothread
- Graphene and Carbon Nanotube Hybrid Structure: A Review
- A multiscale evaluation of the surface integrity in boring trepanning association deep hole drilling
- A computationally-efficient layout optimization method for real wind farms considering altitude variations
- A coupled finite volume & discrete element method to examine particulate foulant transport in metal foam heat exchangers
- Modeling heat transfer during friction stir welding using a meshless particle method
- Heterogeneous nanomechanical properties of type I collagen in longitudinal direction
- A review of biomass burning: Emissions and impacts on air quality, health and climate in China
- A New Particle Generation Method for Arbitrary 2D Geometries in SPH Modeling
- Novel trends in numerical modelling of plant food tissues and their morphological changes during drying – A review
- MRI magic-angle effect in femorotibial cartilages of the red kangaroo
- An agent-based method for simulating porous fluid-saturated structures with indistinguishable components
- An elastic–plastic asperity contact model and its application for micro-contact analysis of gear tooth profiles
- Graphene helicoid as novel nanospring
- A Novel Experimental Method to Assess Particle Deposition in Idealized Porous Channels
- Turbulent dense gas flow characteristics in swirling conical diffuser
- Unexpected dynamic recrystallization behavior of Ti-7Cu alloy in semi-solid state
- Analysis of particle-laden fluid flows, tortuosity and particle-fluid behaviour in metal foam heat exchangers
- Strained graphitic carbon nitride for hydrogen purification
- Mechanical Properties of Penta-Graphene Nanotubes
- Pulmonary aerosol transport and deposition analysis in upper 17 generations of the human respiratory tract
- The best features of diamond nanothread for nanofibre applications
- Optimization of wind farm layout with complex land divisions
- Nanojoint Formation between Ceramic Titanate Nanowires and Spot Melting of Metal Nanowires with Electron Beam
- An elastic–plastic asperity contact model and its application for micro-contact analysis of gear tooth profiles
- Strained graphitic carbon nitride for hydrogen purification
- Heterogeneous nanomechanical properties of type I collagen in longitudinal direction
- Modeling heat transfer during friction stir welding using a meshless particle method
- A New Particle Generation Method for Arbitrary 2D Geometries in SPH Modeling
- Novel trends in numerical modelling of plant food tissues and their morphological changes during drying – A review
- Turbulent dense gas flow characteristics in swirling conical diffuser
- The best features of diamond nanothread for nanofibre applications
- Unexpected dynamic recrystallization behavior of Ti-7Cu alloy in semi-solid state
- Mechanical Properties of Penta-Graphene Nanotubes
- Graphene helicoid as novel nanospring
- A coupled finite volume & discrete element method to examine particulate foulant transport in metal foam heat exchangers
- A Novel Experimental Method to Assess Particle Deposition in Idealized Porous Channels
- A review of biomass burning: Emissions and impacts on air quality, health and climate in China
- An agent-based method for simulating porous fluid-saturated structures with indistinguishable components
- Optimization of wind farm layout with complex land divisions
- MRI magic-angle effect in femorotibial cartilages of the red kangaroo
- A computationally-efficient layout optimization method for real wind farms considering altitude variations
- Analysis of particle-laden fluid flows, tortuosity and particle-fluid behaviour in metal foam heat exchangers
- Pulmonary aerosol transport and deposition analysis in upper 17 generations of the human respiratory tract
- Nanojoint Formation between Ceramic Titanate Nanowires and Spot Melting of Metal Nanowires with Electron Beam