### Dr. Suvash C. Saha

Postdoctoral Research Fellow

Laboratory for Advanced Modelling and Simulation in Engineering and Science## Books

**S. C. Saha**,*“Scaling analysis of natural convection boundary layers: Application to attic space”*Lambert Academic Publishing, Germany, ISBN: 978-3-8465-8649-5. pages: 208.

## Book Chapters

- C. Kumar, A. Putrantro, M. Mahiuddina,
**S. C. Saha**and M. A. Karim, Y.T. Gu, “Mathe- matical modelling of intermittent drying ”, In*Intermittent and Nonstationary Drying Tech- nologies: Principles and Applications*, (Eds,A. Karim), ISBN 97814987840925, (1st ed.) CRC Press, 2017, in press. - M. Islam,
**S.****C.****Saha**, M.A. Karim, “A method of three dimensional thermo-ﬂuid simula- tion of the receiver of a standard parabolic trough collector”, In*Application of Thermo-ﬂuid Processes in Energy Systems: Key Issues and Recent Developments for a Sustainable Future*, (Eds, M. M. K. Khan, A. Chowdhury, N.M.S. Hassan), ISBN 978-981-10-0697-5, (1st ed.) Springer, 2017, in press. **S. C. Saha**, Y.T. Gu, M.M.K. Khan, “Heat transfer enhancement in a baﬄed attic shaped space”, In*Application of Thermo-ﬂuid Processes in Energy Systems: Key Issues and Recent Developments for a Sustainable Future*, (Eds, M. M. K. Khan, A. Chowdhury, N.M.S. Hassan), ISBN 978-981-10-0697-5, (1st ed.) Springer, 2017, in press.- M. F. Ismail,
**S.****C.****Saha**, “Enhancement of conﬁned air jet impingement heat transfer using perforated pin ﬁn heat sinks”, In*Application of Thermo-ﬂuid Processes in Energy Systems: Key Issues and Recent Developments for a Sustainable Future*, (Eds, M. M. K. Khan, A. Chowdhury, N.M.S. Hassan), ISBN 978-981-10-0697-5, (1st ed.) Springer, 2017, in press. **S. C. Saha**, Y. T. Gu, M. M. Khan, “Natural Convection Heat Transfer in the Partitioned Attic Space”, In*Thermoﬂuids modeling for energy eﬃciency applications*, (Eds, M. M. K. Khan, N.M.S. Hassan), ISBN-13: 978-0128023976, ISBN-10: 012802397X, (1st ed.) Elsevier, 2015, (Chapter 3) pp. 59 – 72.- M. F. Ismail,
**S.****C.****Saha**, M. A. R. Sarkar,“Eﬀects of lateral perforation geometry on heat transfer characteristics on extended surfaces”, In*Thermoﬂuids modeling for energy eﬃciency applications*, (Eds, M. M. K. Khan, N.M.S. Hassan), ISBN-13: 978-0128023976, ISBN-10: 012802397X, (1st ed.) Elsevier, 2015, (Chapter 5) pp. 103 – 117. - P. Das, M. M. Khan,
**S. C. Saha**, “Numerical study of ﬂow through a reducer for scale growth suppression”, In*Thermoﬂuids modeling for energy eﬃciency applications*, (Eds, M. M. K. Khan, N.M.S. Hassan), ISBN-13: 978-0128023976, ISBN-10: 012802397X, (1st ed.) Elsevier, 2015, (Chapter 6) pp. 119 – 148. - U. S. Mahabaleswar,
**S.****C.****Saha**, “Analytical solution of a Walters’ liquid B ﬂow over a stretching sheet in a porous medium”, In*Focus**on Porous Media Research*, (Eds, Changying Zhao). ISBN: 978-1-62618-668-2. Nova Science Publishers Inc., NY, 2013 (Chapter 3), pp. 121 – 130. **S. C. Saha**, “Natural convection in the attic-shaped spaces” In*Advances in Energy Research. Volume 9*, (Eds, Morena J. Acosta), ISBN 978-1-61470-485-0. Nova Science Publishers Inc., NY, 2012 (Chapter 14), pp. 289 – 309.**S. C. Saha**, “Periodically forced natural convection through the roof of an attic-shaped building” In*Convection and Conduction Heat Transfer*, (Eds, Dr. Amimul Ahsan) ISBN 978-953-307-582-2 InTech Publishers, 2011 (Chapter 2), pp. 33 – 54.

## Selected Journal Publications

- A.M. Seﬁdan,A. Ali,
**S.C.****Saha**, “Nanoﬂuid-based cooling of cylindrical lithium-ion battery packs employing forced air ﬂow”.*International Journal of Thermal Sciences*,**117**(2017) pp. 44 – 58. [IF: 2.769] - C.S. From, E. Sauret, S.W. Armﬁeld,
**S.C.****Saha**, Y.T. Gu, “Turbulent dense gas ﬂow charac- teristics in swirling conical diﬀuser computers and ﬂuids”.*Computers**& Fluids*,**149**, (2017), pp. 100 – 118. [IF: 1.891] - M. S. Islam,
**S.C.****Saha**, E. Sauret, I. Yang, Y. Gu, “Pulmonary aerosol transport and deposition analysis in upper 17 generations of the human respiratory tract.”*Journal of Aerosol Science*,**108**, (2017), pp. 29 – 43 [IF: 2.278] - S.T.W. Kuruneru, E. Sauret,,
**S.****C.****Saha**, Y.T. Gu, “A novel experimental method to assess particle deposition in idealized porous channels”.*Heat**Transfer**Engineering*.**38**, (2017), pp. 1008 – 1017. [IF: 1.016] - H. Cui, F. Xu,
**S. C. Saha**, “Transition to unsteady natural convection ﬂow in a prismatic enclosure of triangular section”,*International Journal of Thermal Sciences*,**111**, (2017), pp. 330 – 339. [IF: 2.769]. - P. G. H. Nayanajith,
**S. C. Saha**, E. Sauret, R. Flower, Y. T. Gu, “A coupled SPH-DEM approach to model the interactions between multiple red blood cells on motion and deforma- tion in capillary”,*International Journal of Mechanics & Materials in Design*,**12**, (2016), pp. 477 – 494. [IF: 1.926]. - P.G.H. Nayanajith,
**S.****C.****Saha**, E. Sauret, R. Flower, W. Senadeera, Y.T. Gu, “SPH DEM approach to numerically simulate the deformation of three dimensional RBCs in non uniform capillaries”,*BioMedical**Engineering**O**nLine*,**15**, (2016), pp. 349 – 370. [IF: 1.38] - S. Barns, E. Sauret,
**S.****C.****Saha**, R. Flower, Y. T. Gu, “Two-layer Red Blood Cell membrane model using the discrete element method”,*Applied Mechanics and Materials*,**846**, (2016), pp. 270 – 275. [IF: 1.38] - S.T.W. Kuruneru, E. Sauret,,
**S.****C.****Saha**, Y.T. Gu,“Numerical investigation of temporal evolution of particulate fouling in metal foams for air-cooled heat exchangers”,*Applied**Ener**gy*,**184**(2016), pp. 531 – 547. [IF: 5.746] - S.-Ul-Islam, H. Rahman, W. S. Abbasi,
**S.****C.****Saha**, T. Shahina, “Numerical investigation of ﬂow past row of rectangular rods”,*Alexandria Engineering Journal*,**55**(2016), pp. 2351 – 2365. - A. Sojoudi,
**S.****C.****Saha**, A. M. Seﬁdan, Y.T. Gu, “Natural convection subject to sinusoidal thermal forcing on inclined walls and heat source located on bottom wall of an attic-shaped space”,*Ener**gy**and Buildings*,**128**, (2016), pp. 845 – 866. [IF: 2.973]. - A. Sojoudi, M. Khezerloo,
**S. C. Saha**, Y. T. Gu, “Eﬀect of rotating cylinder on heat transfer in a diﬀerentially heated rectangular enclosure ﬁlled with Power Law non-Newtonian ﬂuid”,*International Journal of Numerical Methods for Heat and Fluid Flow*,**26**(2016), pp.1910 – 1931. [IF: 1.475]. - S. Mojumder, K. M. Rabbi, S. Saha, M. N. Hasan,
**S.****C.****Saha**, “Magnetic ﬁeld eﬀect on natu- ral convection and entropy generation in a half-moon shaped cavity with semi-circular bottom heater having diﬀerent ferroﬂuid inside”,*Journal of Magnetism and Magnetic Materials*,**407**, (2016), pp. 412 – 424. [IF: 2.357]. - A. Sojoudi,
**S.****C. Saha**, F. Xu, Y. T. Gu, “Transient air ﬂow and heat transfer due to diﬀerential heating on inclined walls and heat source placed on the bottom wall in a partitioned attic shaped space”,*Ener**gy**and Buildings*,**113**, (2016), pp. 39 – 50. [IF: 2.973]. - S.-Ul-Islam, S. Islam, H. Rahman, Z. C. Ying,
**S. C. Saha**, “Comparison of wake structures and force measurements behind three side-by-side cylinders”,*Journal of the Brazilian Society of Mechanical Sciences and Engineering*,**38**, (2016), pp. 843 – 858. [IF: 0.963]. - M. Bovand, S. Rashidi, J. A. Esfahani,
**S.****C.****Saha**, Y. T. Gu, M. Dehesht, “Control of ﬂow around a circular cylinder wrapped with a porous layer by Magnetohydrodynamic”,*Journal of Magnetism and Magnetic Materials*,**401**, (2016), pp. 1078 – 1087. [I.F. 2.357]. - S. Hussain, N. C. Roy, M. A. Hossain,
**S.****C.****Saha**, “Eﬀect of ﬂuctuating surface heat and mass ﬂux on natural convection ﬂow along a vertical ﬂat plate”,*Mathematical Problems in Engineering*,**2015**, (2015), pp. 258016, 15 pages [IF: 0.762]. - H. Rahman, S.-Ul-Islam, Z. C. Ying, T. Kiyani,
**S.****C.****Saha**,“On the eﬀect of Reynolds number for ﬂow past three side-by-side square cylinders for unequal gap spacings”*KSCE Journal of Civil Engineering*,**19**(2015) pp. 233 – 247, [IF: 0.484]. - S. Siddiqa, M. A. Hossain,
**S.****C.****Saha**, “Two-phase natural convection ﬂow of a dusty ﬂuid”, International Journal of Numerical Methods for Heat and Fluid Flow,**25**(2015) pp. 1542 – 1556. [IF: 1.399]. - H. Cui, F. Xu,
**S. C. Saha**, “A three-dimensional simulation of transient natural convection in a triangular cavity”*International Journal of Heat and Mass Transfer*,**85**(2015) pp. 1012 – 1022, [IF: 2.857]. - P. G. H. Nayanajith,
**S. C. Saha**, E. Sauret, R. Flower, Y. T. Gu, “Numerical investigation of motion and deformation of a single red blood cell in a stenosed capillary”,*International Journal of Computational Methods*,**12**, (2015), pp. 1540003, [IF: 0.750]. - A. Sojoudi,
**S.****C.****Saha**, Y. T. Gu, “Natural convection due to diﬀerential heating of inclined walls and heat source placed on bottom wall of an attic shaped space”,*Ener**gy**and Buildings*,**89**(2015) pp. 153 – 162. [IF: 2.884]. **S. C. Saha**, Y. T. Gu, “Natural convection in a triangular enclosure heated from below and non-uniformly cooled from top”,*International Journal of Heat and Mass Transfer*,**80**(2015) pp. 529 – 538. [IF: 2.857]- A. Sojoudi,
**S. C. Saha**, M. Khezerloo, Y. T. Gu, “Unsteady natural convection within a porous enclosure of sinusoidal corrugated side walls”,*Transport in Porous Media*,**104**(2014) pp. 537 – 552. [IF: 1.551]. **S. C. Saha**, E. Sauret, Y. T. Gu, “Magnetic convection heat transfer in an open ended enclosure filled with paramagnetic fluids”,*Applied Mechanics and Materials*,**553**(2014) pp. 109 – 114.- S. Siddiqa, M. A. Hossain,
**S. C. Saha**, “The effect of thermal radiation on the natural convection boundary layer flow over a wavy horizontal surface”,*International Journal of Thermal Sciences*,**84**(2014), pp. 143–150. [IF: 2.470]. - M. Saleem, M. A. Hossain,
**S. C. Saha**, Y. T. Gu, “Heat transfer analysis of viscous incompressible fluid by combined natural convection and radiation in an open cavity”,*Mathematical Problems in Engineering*,**2014**(2014), Article ID 412480, 14 pages. [IF: 1.383]. - A. Sojoudi, A. Mazloomi,
**S. C. Saha**, Y. T. Gu, “Similarity solutions for flow and heat transfer of non-Newtonian fluid over a stretching surface”,*Journal of Applied Mathematics*,**2014**(2014), Article ID 718319, 8 pages [I.F. 0.834]. - P. G. H. Nayanajith,
**S. C. Saha**, Y. T. Gu, “Formation of the three-dimensional geometry of the red blood cell’s membrane”,*ANZIAM Journal*,**55**(2014) pp. C80 – C95, [I.F. 1.043]. - P. G. H. Nayanajith,
**S. C. Saha**, Y. T. Gu, “Deformation of a single red blood cell in a microvessel”,*ANZIAM Journal*,**55**(2014) pp. C64 – C79, [I.F. 1.043]. - F. Xu,
**S. C. Saha**, “Transition to an unsteady flow induced by a fin on the sidewall of a differentially heated air-filled cavity and heat transfer”,*International Journal of Heat and Mass Transfer*,**71**(2014) pp. 236 – 244. [IF: 2.315]. PDF - M. F. Ismail, M. N. Hasan,
**S. C. Saha**, “Numerical study of turbulent fluid flow and heat transfer in lateral perforated extended surfaces”,*Energy*,**64**(2014) pp. 632 – 639, [IF: 3.651]. - M. Islam, M. A. Karim,
**S. C. Saha**, S. Miller, and P. K. D. V. Yarlagadda, “Development of empirical equations for irradiance profile of a standard parabolic trough collector using Monte Carlo ray tracing technique”,*Advanced Materials Research*,**860-863**(2014) pp. 180 – 190. PDF **S. C. Saha**, M. M. K. Khan, Y. T. Gu,“Unsteady buoyancy driven flows and heat transfer through coupled thermal boundary layers in a triangular enclosure”,*International Journal of Heat and Mass Transfer*,**68**(2014) pp. 375 – 382, [IF: 2.315]. PDF- M. Saleem, M. A. Hossain,
**S. C. Saha**, “Double diffusive Marangoni convection flow of electrically conducting fluid in a square cavity with chemical reaction and heat generation”,*Journal of Heat Transfer – Transactions of the ASME*,**136**(2014) pp. 062001, [IF: 1.718. PDF - S.U. Islam, W. S. Abbasi,
**S. C. Saha**, Z. C. Ying, Y. T. Gu, “Numerical simulation of flow past four square cylinders in an in-line square configuration using the Lattice Boltzmann method for various separation ratios”,*KSCE Journal of Civil Engineering*, [IF: 0.383], accepted on 12/10/2013. PDF **S. C. Saha**, Y. T. Gu, “Transient air flow and heat transfer in a triangular enclosure with a conducting partition”,*Applied Mathematical Modelling*, [IF: 1.706], accepted on 14/10/2013. PDF- W. S. Abbasi, S.-Ul-Islam,
**S. C. Saha**, Y. T. Gu, Z. C. Ying, “Effect of Reynolds numbers on flow past four square cylinders in an in-line square configuration for different gap spacings”,*Journal of Mechanical Science and Technology*,**28**(2014) pp. 539 – 552. [IF: 0.616]. PDF - S. C. Paul,
**S. C. Saha**, Y. T. Gu, “Effect of an adiabatic fin on natural convection heat transfer in a triangular enclosure”, American Journal of Applied Mathematics, 1(2013) pp. 78-83. - A. Sojoudi,
**S. C. Saha**, Y. T. Gu, M. A. Hossain, “Steady natural convection of non-Newtonian Power-law fluid in a trapezoidal enclosure”, Advances in Mechanical Engineering, [IF: 1.062], In Press. - S
**. C. Saha**, “Effect of MHD and heat generation on natural convection flow in an open square cavity under microgravity condition” Engineering Computations, 30 (2013). pp. 5 – 20. [IF: 1.214]. - M.A. Taher,
**S. C. Saha**, Y.W. Lee, H.D. Kim, “Lattice-Boltzmann simulation of fluid flow and heat transfer in a lid-driven square cavity”. American Journal of Fluid Dynamics, 3(3) (2013) pp. 40 – 47. - S. Siddiqa, M. A. Hossain,
**S. C. Saha**, “Natural convection flow with surface radiation along a horizontal wavy surface” Numerical Heat Transfer Part A – Applications, 64 (2013) pp. 400 – 415. [IF: 2.492]. **S. C. Saha**, “Effect of MHD and heat generation on natural convection flow in an open square cavity under microgravity condition” Engineering Computations, 30 (2013). pp. 5-20. [IF: 1.060].- M. N. Hasan,
**S. C. Saha**, Y. T. Gu, “Mixed convection over a horizontal plate with streamwise non-uniform surface temperature”, Journal of Heat Transfer – Transactions of the ASME, 135, (2013) pp. 072501 (9 pages) [IF: 1.718]. - S. Siddiqa, M. A. Hossain,
**S. C. Saha**, “Natural convection flow in a strong cross magnetic field with radiation”, Journal of Fluids Engineering – Transactions of the ASME, 135, (2013) pp. 051202-1-9 (9 pages) [IF: 0.747]. - S. Bhowmick, M. M. Molla,
**S. C. Saha**, “Non-Newtonian natural convection flow along an isothermal horizontal circular cylinder”, American Journal of Fluid Dynamics. 3 (2003) pp. 20-30. - M. A. Hossain, M. Saleem,
**S. C. Saha**, A. Nakayama, “Conduction-radiation effect on natural convection flow in a fluid-saturated non-Darcy porous medium enclosed by non-isothermal walls”. Applied Mathematics and Mechanics (English edition), [IF: 0.558]. Accepted on 31.12.2012. - A. Sojoudi1,
**S. C. Saha**, “Shear thinning and shear thickening non- Newtonian confined fluid flow over rotating cylinder”, American Journal of Fluid Dynamics, 2 (6), (2012) pp. 117-121. **S. C. Saha**, R. J. Brown, Y. T. Gu, “Prandtl number scaling of the unsteady natural convection boundary layer adjacent to a vertical flat plate for Pr > 1 subject to ramp surface heat flux”. International Journal of Heat and Mass Transfer. 55 (2012) pp. 7046 – 7055. [IF: 2.407].- M. Saleem, M. A. Hossain,
**S. C. Saha**, “Mixed convection flow of micropolar fluid in an open ended arc-shape cavity” Submitted to Journal of Fluids Engineering – Transactions of the ASME, 134, (2012) pp. 091101 (9 pages) [IF: 0.747. - S. Siddiqa, M. A. Hossain,
**S. C. Saha**, “Double diffusive magnetoconvection fluid flow in a strong cross magnetic field with uniform surface heat and mass flux”, Journal of Heat Transfer – Transactions of the ASME, 134 (2012) pp. 114506 (9 pages) [IF: 1.830]. **S. C. Saha**, Y. T. Gu, “Prandtl number scaling of natural convection of an inclined flat plate due to uniform surface heat flux”. ANZIAM J., 53 (2012) C387-C403. IF: 0.414.- M. N. Hasan,
**S. C. Saha**, Y. T. Gu, “Unsteady natural convection within an differentially heated enclosure of sinusoidal corrugated side walls”. International Journal of Heat and Mass Transfer,**55**(2012) pp. 5696-5708. I. F. 1.898. **S. C. Saha**, Y. T. Gu, “Free convection in a triangular enclosure with fluid-saturated porous medium and internal heat generation”, ANZIAM J. 53 (2012) C127-C141. IF: 0.414.**S. C. Saha**, Y. T. Gu, “Natural convection in a triangular enclosure due to non-uniform cooling on top”, ANZIAM J. 53 (2012) C53-C68. IF: 0.414.- M. M. Molla,
**S. C. Saha**, M. A. I. Khan, “MHD natural convection flow from an isothermal horizontal circular cylinder with temperature dependent viscosity”, Engineering Computations, IF: 0.871. Accepted on 31.01.2012. **S. C. Saha**, R. J. Brown, Y. T. Gu, “Scaling for the Prandtl number of the natural convection boundary layer of an inclined flat plate under uniform surface heat flux”. International Journal of Heat and Mass Transfer, 55 (2012) pp. 2394-2401. I. F. 1.898.**S. C. Saha**, M. M. K. Khan “An improved boundary layer scaling with ramp heating on a sloping plate” International Journal of Heat and Mass Transfer, 55 (2012) pp. 2268-2284. IF: 1.898.- M. N. Hasan, S. Saha,
**S. C. Saha**, “Effects of corrugation frequency and aspect ratio on natural convection within an enclosure having sinusoidal corrugation over a heated top surface” International Communications in Heat and Mass Transfer, 39 (2012) pp. 368-377. IF: 1.609. **S. C. Saha**, Y. T. Gu, M. M. Molla, S. Siddiqa, M. A. Hossain, “Natural convection from a vertical plate embedded in a stratified medium with uniform heat source.” Desalination and Water Treatment, 44 (2012) pp. 7-14. IF: 0.752.- M. M. Molla,
**S. C. Saha**, M. A. I. Khan, “Natural convection flow in a porous enclosure with localized heating from below”, JP Journal of Heat and Mass Transfer, 6 (2012) pp. 1-16. - M. M. Molla,
**S. C. Saha**, M. A. Hossain, “The effect of temperature dependent viscosity on MHD natural convection flow from an isothermal sphere”, Journal of Applied Fluid Mechanics, 5 (2012) pp. 25-31. **S. C. Saha**, “Scaling of free convection heat transfer in a triangular cavity for Pr > 1” Energy and Buildings, 43 (2011) pp. 2908-2917 IF: 2.041.**S. C. Saha**, M. M. K. Khan, “A review of natural convection and heat transfer in attic-shaped space ” Energy and Buildings, 43 (2011) pp. 2564-2571. IF: 2.041.**S. C. Saha**, F. Xu, M. M. Molla, “Scaling analysis of the unsteady natural convection boundary layer adjacent to an inclined plate for Pr > 1 following instantaneous heating”,Journal of Heat Transfer – Transactions of the ASME, 133, (2011) 112501. IF: 0.940.**S. C. Saha**, “Unsteady natural convection in a triangular enclosure under isothermal heating” Energy and Buildings, 43 (2011) pp. 695-703. IF: 2.041.- M. M. Molla,
**S. C. Saha**, M.A.I. Khan, M.A. Hossain, “Radiation effects on natural convection laminar flow from a horizontal circular cylinder”, Desalination and Water Treatment, 30 (2011) pp. 89-97. IF: 0.752. - M. M. Molla,
**S. C. Saha**, M. A. Hossain, “Radiation effect on free convection laminar flow along a vertical flat plate with streamwise sinusoidal surface temperature” Mathematical and Computer Modelling, 53 (2011) pp. 1310-1319. IF: 1.066. **S. C. Saha**, J. C. Patterson, C. Lei, “Scaling of natural convection of an inclined flat plate: Sudden cooling condition”, Journal of Heat Transfer – Transactions of the ASME, 133 (4) (2011) pp. 041503. IF: 0.942.**S. C. Saha**, J. C. Patterson, C. Lei, “Scaling of natural convection of an inclined flat plate: Ramp cooling condition”, International Journal of Heat and Mass Transfer, 53 (2010) pp. 5156-5166. Cites: 2, IF: 1.898.**S. C. Saha**, J. C. Patterson, C. Lei, “Natural convection boundary layer adjacent to an inclined flat plate subject to sudden and ramp heating” International Journal of Thermal Sciences, 49 (2010) pp. 1600-1612. Cites: 2, IF: 1.667.**S. C. Saha**, J. C. Patterson, C. Lei, “Natural convection in attic-shaped spaces subject to sudden and ramp heating boundary conditions”, Heat and Mass Transfer, 46 (2010) pp. 621-638. Cites: 1, IF: 0.667.**S. C. Saha**, J. C. Patterson, C. Lei, “Natural convection and heat transfer in attics subject to periodic thermal forcing”, International Journal of Thermal Sciences, 49 (2010) pp. 1899-1910. Cites: 2, IF: 1.667.**S. C. Saha**, J. C. Patterson, C. Lei, “Natural convection in attics subject to instantaneous and ramp cooling boundary conditions”, Energy and Buildings, 42 (2010) pp. 1192-1204. Cites: 5, IF: 2.041.**S. C. Saha**, C. Lei, J. C. Patterson, “Effect of aspect ratio on natural convection in attics subject to periodic thermal forcing”, ANZIAM J., 48 (2007) pp C677-C691, IF: 0.414.- M. A. Hossain,
**S. C. Saha**, R. S. R. Gorla, “Viscous dissipation effects on natural convection from a vertical plate with uniform surface heat flux placed in a thermally stratified media” International Journal of Fluid Mechanics Research, 32 (2005) pp. 269-280. **S. C. Saha**, M. A. Hossain, “Natural convection flow with combined buoyancy effects due to thermal and mass diffusion in a thermally stratified medium” Nonlinear Analysis: Modelling and Control, 9 (2004) pp. 89-102.**S. C. Saha**, C. Akhter, M. A. Hossain, “Natural convection from a plane vertical porous surface in non isothermal surroundings” Nonlinear Analysis: Modelling and Control, 9 (2004) pp.1-20.

## Selected Refereed Conference Papers

- M.A. Balanant, A.V. Kashchuk, A.B. Stilgoe, R.L. Flower, H. Rubinsztein-Dunlop, E.S. Sauret,
**S. C. Saha**, Y.T. Gu, “Measurement of Deformability and Elasticity Properties of Red Blood Cells through Stretching using Optical Tweezers”,*Proceedings of the 27th regional congress of the International Society of Blood Transfusion*, 17 –21 June 2017, Copenhagen, Denmark. - R.L. Flower, M.A. Balanant, M.M. Dean, E.S. Sauret,
**S. C. Saha**, Y.T. Gu, “Reversal of Storage-Related Morphological Changes in Red Blood Cells: What is the Impact in the Mi- crocirculation”,*Proceedings of the 16th International Conference on Biomedical Engineering*, 7 – 10 December, 2016, Singapore. - M.A. Balanant, MM Dean, RL Flower, E Sauret,
**S. C. Saha**, Y.T. Gu, “Storage-Related Morphological Changes in Red Blood Cells: Telling the Whole Story”,*HAA Annual Scientiﬁc Meeting 2016 (HAA2016)*, 13 – 16 November, 2016, Melbourne, Australia. (Poster). - Y.T. Gu, PGH. Nayanajith
**S. C. Saha**, E Sauret, “An advanced numerical model for under- standing the deformability of healthy and infected red blood cells”,*Proceedings of the 12th World Congress on Computational Mechanics & the 6th Asia-Paciﬁc Congress on Computa- tional Mechanics*, 24 – 29 July, 2016, Seoul, Korea. - M.S. Islam,
**S.****C.****Saha**, E. Sauret, Y.T. Gu, “Diesel Exhaust Particle Transport and De- position in Upper 4 Generations of the CT-Scan based Lung Airways”,*Proceedings of the 20th Australasian Fluid Mechanics Conference (AFMC2016)*, 05 – 08 December, 2016, Perth, Australia. - S. T. W. Kuruneru, E. Sauret,
**S.****C.****Saha**, Y.T. Gu , “Numerical assessment of vortex shedding and heat transfer characteristics past an array of equilateral triangular cylinders in cross ﬂow”,*Proceedings of the 20th Australasian Fluid Mechanics Conference (AFMC2016)*, 05 – 08 December, 2016, Perth, Australia. - S. T. W. Kuruneru, E. Sauret,
**S.****C.****Saha**, Y.T. Gu , “Transient Conjugate Heat Transfer and Particle Deposition in 2D Porous Metal Foam Heat Exchangers”,*Proceedings of the 20th Australasian Fluid Mechanics Conference (AFMC2016)*, 05 – 08 December, 2016, Perth, Australia. - C. Kumar, E. Sauret,
**S.****C.****Saha**, Y.T. Gu , “Coupled electromagnetics and multiphase transport for Intermittent Microwave-Convective Drying (IMCD) of Food Materials”,*Pro- ceedings of the 10th Australasian Heat and Mass Transfer Conference (AHMT2016)*, 14 – 15 July, 2016, Brisbane, Australia. - S. T. W. Kuruneru, E. Sauret,
**S.****C.****Saha**, Y.T. Gu , “Transient Conjugate Heat Transfer And Industrial Aerosol Deposition In Idealized 3D Metal Foam Heat Exchangers”,*Proceedings of the 10th Australasian Heat and Mass Transfer Conference (AHMT2016)*, 14 – 15 July, 2016, Brisbane, Australia. - P. Das, M.M.K. Khan, M.G. Rasul,
**S. C. Saha**, “CFD Simulation of Fluid Flow Char- acteristics on Scale Growth Mechanism in a Concentric Reducer”,*Proceedings of the 10th Australasian Heat and Mass Transfer Conference (AHMT2016)*, 14 – 15 July, 2016, Brisbane, Australia. - M. N. Siddiki, M. M. Molla,
**S.****C.****Saha**, “Natural convection ﬂow in porous enclosure with localized heating from below with heat ﬂux”,*Proceedings of the 11th International Conference on Mechanical Engineering (ICME2015)*, 18 – 20 December, 2015, Dhaka, Bangladesh. - S. Bhowmick, F. Xu,
**S. C. Saha**, “Transient natural convection in a valley shaped triangular cavity initially ﬁlled with stratiﬁed water”,*Proceedings of the 11th International Conference on Mechanical Engineering (ICME2015)*, 18 – 20 December, 2015, Dhaka, Bangladesh. **S.****C. Saha**, M. M. Molla, S. Saha, Y. T. Gu, “Natural convection of coupled thermal boundary layers adjacent to a wavy conducting partition placed in a square diﬀerential heated enclosure”,*Proceedings of the 11th International Conference on Mechanical Engineer- ing (ICME2015)*, 18 – 20 December, 2015, Dhaka, Bangladesh.- S. Barns, E. Sauret,
**S. C. Saha**, R. Flower, Y.T. Gu, “Two-Layer Red Blood Cell Membrane Model using the Discrete Element Method”,*Proceedings of the 2nd Australasian Conference on Computational Mechanics (ACCM2015)*, 30 November – 01 December 2015, Brisbane, Australia. - M.S. Islam,
**S.****C.****Saha**, E. Sauret, Y.T. Gu, “Eﬀects of Velocity on Diesel Exhaust Particle Transport and Deposition in the Central Airways of the Human Lung”,*Proceedings of the 2nd Australasian Conference on Computational Mechanics (ACCM2015)*, 30 November – 01 December 2015, Brisbane, Australia. - M. Hardwick,
**S. C. Saha**, “Numerical Modelling of Optimisation of Bladeless Fan Design”,*Proceedings of the 2nd Australasian Conference on Computational Mechanics (ACCM2015)*, 30 November – 01 December 2015, Brisbane, Australia. - S.T.W. Kuruneru, E. Sauret,
**S. C. Saha**, Y.T. Gu, “Poly-disperse particle transport and deposition in idealized porous channels”,*Proceedings of the 2nd Australasian Conference on Computational Mechanics (ACCM2015)*, 30 November – 01 December 2015, Brisbane, Aus- tralia. - S.T.W. Kuruneru, E. Sauret,
**S.****C.****Saha**, K. Hooman, Y.T. Gu, “A novel experimental technique to assess poly-disperse particulate deposition and aggregation in idealized porous channels,”*Proceedi**n**g**s**of the 17th IAHR International Conference on Cooling Tower and Heat**Exchanger*, 8 – 11 September 2015, Gold Coast, Australia. - P. Das, M.M.K. Khan, M.G. Rasul,
**S. C. Saha**, “Study of ﬂuid dynamics approach to scale growth mechanism and its suppression technique”,*Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015)*26 – 29 November, 2015, Chittagong, Bangladesh. - P. Das, M.M.K. Khan, M.G. Rasul,
**S. C. Saha**, “Fluid ﬂow chracterictics on scale deposition in a concentric reducer using cfd approach”,*Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics*, 20 – 23 July 2015, Kruger National Park, South Africa. - P. G. H. Nayanajith,
**S. C. Saha**, E. Sauret, R. Flower, Y. T. Gu, “Numerical investigation of the critical diameter for a stenosed capillary to prevent the motion of red blood cells”,*Proceedings of the 25th Regional Congress of the ISBT*, June 27 – July 1, 2015, London, UK. - M. S. Islam,
**S.****C.****Saha**, E. Sauret, Y. T. Gu, “Numerical investigation of aerosol particle transport and deposition in realistic lung airway”,*Proceedings of the 6th International Con- ference on Computational Methods (ICCM2015)*, 14 – 17 July, 2015, Auckland, New Zealand. - A. Zou, E. Sauret,
**S. C. Saha**, Y. T. Gu, “Stochastic analysis of a radial-inﬂow turbine in the presence of parametric uncertainties”*Proceedings of the 6th International Conference on Computational Methods (ICCM2015)*, 14 – 17 July, 2015, Auckland, New Zealand. - PGH. Nayanajith,
**S.****C.****Saha**, Y. T. Gu, “Deformation of a three-dimensional Red Blood Cell in a stenosed micro-capillary”,*Proceedings of the 8th Australasian Congress on Applied Mechanics (ACAM8)*, Melbourne Convention and Exhibition Centre 24 — 28 November 2014, Australia. **S.****C.****Saha**, M. Rannie, E. Sauret, Y. T. Gu, “Numerical modelling for improved underground- mine ventilation systems”,*Proceedings of the 8th Australasian Congress on Applied Mechanics (ACAM8)*, Melbourne Convention and Exhibition Centre 24 – 28 November 2014, Australia.**S.****C.****Saha**, Y.T. Gu, “Unsteady natural convection heat transfer in a baﬄed triangular en- closure”,*Proceedings of the*19*th**A**u**stralasian**Fluid Mechanics Conference (*19*AF**MC**)*, RMIT University, Melbourne, 8 – 11 December 2014, Australia.- S. Bhowmick, M. M. Molla, A. Biswas,
**S.****C.****Saha**, “Non-Newtonian Natural Convection Flow from an Isothermal Sphere with Modiﬁed Power-law Viscosity Model”,*Proceedings of the 18th International Mathematics Conference*, 20 – 22 March, 2014, Independent University (IUB), Dhaka, Bangladesh. - M. Islam, M. A. Karim,
**S.****C.****Saha**, S. Miller, P. K. D. V. Yarlagadda, “An optical ray tracing model of parabolic trough collector applying Monte Carlo technique”,*Proceedi**ng**s**of the Solar 2014 Conference and Expo*, May 8 – 9, 2014, Belbourne Convention and Exibition Centre, Melbourne, Australia. - E. Sauret, K. Hooman,
**S. C. Saha**, “CFD simulations of ﬂow and heat transfer through the porous interface of a metal foam heat exchanger”,*Proceedings of the ASME 2014 Power Conference, Power 2014*, July 28 – 31, 2014, Baltimore, Maryland, USA. - M. Islam, M. A. Karim,
**S.****C.****Saha**, Sarah Miller, P. K. D. V. Yarlagaddaa, “Development of optical ray tracing model of a standard parabolic trough collector”.*Proceedings of the World Renewable Energy Congress Australia 2013*, Western Australia, 14-18 July 2013. - C. Kumar, A. Karim,
**S. C. Saha**, M.U.H. Joardder, R.J. Brown, D. Biswas, “Multiphysics modelling of convective drying of food materials”.*Proceedings of the Global Engineering, Science and Technology Conference*, 28-29 December 2012, Global Institute of Science and Technology, Dhaka, Bangladesh. - M. Islam, A. Karim,
**S.****C.****Saha**, S. Miller, P. K. D. V. Yarlagadda, “Three dimensional sim- ulation of a parabolic trough concentrator thermal collector”,*Proceedings of the 50th Annual Solar Conference 2012 organised by the Australian Solar Council (AuSES))*, 6-7 December 2012, Swinburne University of Technology, Hawthorn Campus, Melbourne, Australia. - M. Islam, A. Karim,
**S.****C.****Saha**, S. Miller, P. K. D. V. Yarlagadda, “Visualization of thermal characteristics around the absorber tube of a standard parabolic trough thermal collector by 3D simulation”,*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, 25 – 28 November 2012, Crowne Plaza, Gold Coast, Australia. **S.****C.****Saha**, Y. T. Gu “Thermo-magnetic convection of paramagnetic ﬂuids with non- instantaneous heating”,*Proceedings of the*18*th**A**u**stralasian**Fluid Mechanics Conference (*18*AF**MC**)*, University of Tasmania, Launceston, 3 – 7 December 2012, Australia.- S. Siddiqa, M. A. Hossain,
**S.****C.****Saha**, “Mixed convection along a vertical ﬂat plate in a non-absorbing medium”,*Proceedings of the 5th BSME International Conference on Thermal Engineering*, 21-23 December 2012, Dhaka, Bangladesh. - M. Saleem, M. A. Hossain
**S.****C.****Saha**, “Natural convection of nanoﬂuids in open rectangular cavity”,*Proceedings of the 5th BSME International Conference on Thermal Engineering*, 21- 23 December 2012, Dhaka, Bangladesh. - S. C. Paul,
**S. C. Saha**, “Analysis of heat transfer and ﬂuid ﬂow in a triangular enclosure in presence of adiabatic ﬁn”,*Proceedings of the 5th BSME International Conference on Thermal Engineering*, 21-23 December 2012, Dhaka, Bangladesh. - A. Sojoudi, H. Afshin, B. Farhanieh,
**S. C. Saha**“Large eddy simulation of smoke ﬂow in a real road tunnel ﬁre using FDS”,*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, 25 – 28 November 2012, Crowne Plaza, Gold Coast, Australia. - F. V. Moghaddam,
**S. C. Saha**, A. Sojoudi, F. V. Moghadam, “Finite volume approach of natural convection in triangular enclosures with localized heating below”,*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, 25 – 28 November 2012, Crowne Plaza, Gold Coast, Australia. - PGH. Nayanajith, Y.T. Gu,
**S. C. Saha**, A. Oloyede1, W. Senadeera “Simulation of red blood cell motion using particle methods: A review”,*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, 25 – 28 November 2012, Crowne Plaza, Gold Coast, Australia. - PGH. Nayanajith, Y.T. Gu,
**S.****C. Saha**, A. Oloyede1, W. Senadeera “Numerical Simulation of Red Blood Cells’ Deformation using SPH Method”,*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, 25 – 28 November 2012, Crowne Plaza, Gold Coast, Australia. - M. Babaie, P. Talebizadeh,
**S. C. Saha**, H. Rahimzadeh, R.J. Brown, “Residence Time Inves- tigation in a Co-axial Dielectric Barrier Discharge Reactor”,*Proceedings of the 4th Interna- tional Conference on Computational Methods (ICCM2012)*, 25 – 28 November 2012, Crowne Plaza, Gold Coast, Australia. **S.****C.****Saha**, Y. T. Gu, “Transient free convection heat transfer through conducting partition placed in an isosceles triangular enclosure”,*Proceedings of the 4th International Conference on Computational Methods (ICCM2012)*, 25 – 28 November 2012, Crowne Plaza, Gold Coast, Australia.- A. Sojoudi, F. Vakilimoghaddam, R. Neishabouri,
**S. C. Saha**, “On the oscillatory behavior of transient Rayleigh Benard convection of air for 2D channel ﬂow at moderate Rayleigh numbers”,*Proceedings of the World Congress on Engineering 2012*, Vol III, WCE 2012, July 4 – 6, 2012, London, U.K. pp. 1874-1878. **S. C. Saha**, Y. T. Gu, M. A. Hossain, “Free convection heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure”, Proceedings of the 9th International Conference on Mechanical Engineering, ICME11, 18-20 December, 2011, BUET, Dhaka, Bangladesh. Paper ID: ICME 11-TH-033.- M. N. Hasan,
**S. C. Saha**, “Mixed convection laminar flow along a horizontal plate subject to streamwise sinusoidal surface temperature”, Proceedings of the 9th International Conference on Mechanical Engineering, ICME11, 18-20 December, 2011, BUET, Dhaka, Bangladesh. Paper ID: ICME 11-TH-011. - M. N. Hasan,
**S. C. Saha**, Y. T. Gu, “Effect of differentially heating and consequent transient behaviour for natural convection within an enclosure of sinusoidal corrugated side walls”, Proceedings of the 9th International Conference on Mechanical Engineering, ICME11, 18-20 December, 2011, BUET, Dhaka, Bangladesh. Paper ID: ICME 11-TH-018. **S. C. Saha**, “Scaling analysis of unsteady natural convection boundary layer for ramp heating”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. (ISBN 978-984-33-2214-2) pp.767-770.**S. C. Saha**, F. Xu, M. M. Molla, T. P. Bednarz, “Scaling analysis of unsteady natural convection boundary layer for instantaneous heating”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. (ISBN 978-984-33-2214-2) pp. 771-775.- M. M. Molla, B-C Wang,
**S. C. Saha**, “Large-Eddy Simulation of physiological pulsatile non-Newtonian flow in a channel with double constriction”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. (ISBN 978-984-33-2214-2) pp. 1084-1088. - T. P. Bednarz, W. Lin,
**S. C. Saha**, “Scaling of thermo-magnetic convection”, Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. (ISBN 978-984-33-2214-2) pp. 798-800. **S. C. Saha**, C. Lei, J. C. Patterson, “Scaling analysis of the thermal boundary layer adjacent to an abruptly heated inclined plate” Proceeding of the 16th Australasian Fluid Mechanics Conference, Crown Plaza, Gold Coast, Australia, 3-7 December 2007, 117-120. (ISBN 978-1-864998-94-8).**S. C. Saha**, C. Lei, J. C. Patterson, “On the natural convection boundary layer adjacent to an inclined flat plate subject to ramp heating” Proceeding of the 16th Australasian Fluid Mechanics Conference, Crown Plaza, Gold Coast, Australia, 3-7 December 2007, 121-124. (ISBN 978-1-864998-94-8).**S. C. Saha**, C. Lei, J. C. Patterson, “Natural convection in a triangular enclosure subject to periodic thermal forcing”, Proceedings of the 13th International Heat Transfer Conference (CD-ROM), edited by Graham de Vahl Davis and Eddie Leonardi, Sydney, Australia, 13-18 August 2006. Paper No. NCV-43. (ISBN 1-56700-226-9).

## Theses and Reports

- SC Saha, YT Gu (2012), *“CDF modelling of new inertial separator design”* Peak3 Australia.
- SC Saha (2008), *“Natural convection adjacent to an inclined flat plate and in an attic space under various thermal forcing conditions”* PhD thesis, James Cook University.
- SC Saha (2005), *“Natural convection in triangular enclosures with different media and complex thermal forcing”* PhD project proposal.
- SC Saha (2000), *“Natural convection flow from a vertical plate embedded in stratified medium with effect of viscous dissipation and double diffusion”* M.Sc. thesis, Department of Mathematics, University of Dhaka, Bangladesh.